Made from best quality hard wood timbers, Designer Flush Doors provide structural strength and dimensional stability. It is very durable and appreciated for its quality, excellent dimensional ability and smooth finish. This type of door is designed with selected hardwood for its high nail holding capacity. The best thing about this type of door is that it has lock rail on both side of the frame. For extra bonding and strength between core and battens, our ISI tested door is coated with PF resin coating. Moreover, the frames and battens of Wooden Flush Door are perfectly treated so that there is no gap remains between battens and frames.
Specification :
FLUSH DOOR -IS 2202 (Part 1) : 1999 | ||
Test | ISI Requirement | Observed Value |
Dimension | Length Width + 5 mm | Within Limits |
Squareness | Deviation not more than 1 mm on a length of 500 mm | Deviation below 1 mm |
General Flatness | Twist, cupping, Warping not to exceed 6 mm |
|
Local Planeness | Depth of deviation at any point to be less than 0.5 mm | With Limits |
Impact indentation Test | Depth of indentation not to exceed 0.2 mm | With Limits |
Edge Loading Test | Deception of edge with max, to be less than 5 mm | With Limits |
Shock Resistance Test | No visible defect after test | No Visible defects |
Bucking Test | Initial deflation <50 mm | With limits |
Swimming Test | No Visible damage after Test | No visible damage |
Misuse Test | No Deformation after test | No Deformation |
Varying Humidity Test | No visible | Warping, Twisting |
| Or de-lamination | Observed |
End Immersion test | No DE-lamination at the end | No de-lemination |
Knife Test | Minimum Pass Standard | Excellent |
Glue Adhesion Test | No de-lamination | No de-lamination |
Screw Withdraw Test | Load to withdraw screw to be more than 1000 N | Load -> 1000 N |